![background image](http://html1.mh-extra.com/html/rankin/520/520_operation-service-and-parts-manual_3652125017.webp)
E
VERY
50 H
OURS OF
W
ORK
- Replace the oil f lter cartridge.
- Check to make sure that the belts are tightened.
- Check that all bolts and nuts are correctly tightened.
E
VERY
250 H
OURS OF
W
ORK
- Check oil hydraulic level.
- Replace oil f lter cartridge.
MAINTENANCE
_________________________________________________________________________________
Before executing maintenance activities on the machine,
stop engine, disengage PTO, pull parking brake, and place
the equipment on the ground in horizontal position.
_________________________________________________________________________________
ROLLER INSPECTION
●
Unscrew the 4 screws
"L"
placed on
top of the chipper and remove
the cover
"M"
protecting the feed
roller
"N"
.
●
If necessary, check the status of roller
and remove the trapped wood.
If you need help, use compressed air.
●
At the end of operation, re-position
the cover
"M"
and tighten the screws
"L"
with their washers, respecting the
tightening torque shown in the Table
on page 21.
MAINTENANCE
15