background image

                                                                             

  31  of 31 

                                                               

20190827-Ver.1.0

 

LIMITED WARRANTY 

 

1. 

Manufacturer  warrants  this  Product  to  be  free  from  defects  in  workmanship  and  materials  for  a 
period of Ninety (90) days from the date of purchase, PROVIDED claims are submitted, in writing, 
with proof of purchase.     

2. 

If any part of this item fails because of a manufacturing defect within the Limited Warranty Period, 
Manufacturer  offers  to  replace  such  part(s)  provided  that  such  parts  have  not  been  improperly 
repaired, altered, or tampered with or subject to misuse, abuse or exposed to corrosive conditions. 
This  Limited  Warranty  is,  however,  subject  to  certain  limitations,  exclusions,  time  limits  and 
exceptions (Hereinafter “Conditions”) as listed below. Read these Conditions carefully. 

3. 

This Limited Warranty shall be limited to the replacement or repair of any part(s) which Manufacturer 
determines, after reasonable examination, to have been defective at the time of manufacturing and 
manufacturer’s obligation(s) shall be limited to replacement, if any, of defective part(s) which shall 
be shipped at Original Purchaser’s expense to Original Purchaser’s designated shipping address. 

4. 

This  Limited  Warranty  is  given  to  and  covers  the 

ORIGINAL  PURCHASER  ONLY 

and  such 

coverage terminates Ninety (90) days from the date of purchase.

 

5. 

DAMAGE LIMITATION WARNING:   

IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR 

ANY  INCIDENTIAL  OR  CONSEQUENTIAL  DAMAGES,  INCLUDING  (BUT  NOT  LIMITED  TO) 
LOSS  OF  USE  OF  THE  PRODUCT,  LOSS  OF  TIME,  LOSS  OF  FOOD,  INCONVENIENCE, 
EXPENSES FOR TRAVEL, TRANSPORTATION LODGING EXPENSES, LOSS BY DAMAGE TO 
PERSONAL PROPERTY OR LOSS OF INCOME, PROFITS OR REVENUE. 

6. 

MANUFACTURER’S  OBLIGATION:

    Manufacturer’s  liability  shall  be  limited  to  the  delivery  of  a 

good, merchantable Product and, if necessary, the repair or replacement, at manufacturer’s option, 
of any defective part or unit. 

7. 

TRANSFER  LIMITATIONS:

    This  Limited  Warranty  is  not  assignable  or  transferable.    It  covers 

only the original purchaser. 

8. 

RESERVED  RIGHT  TO  CHANGE:

    Manufacturer  reserves  the  right  to  make  changes  or 

improvements  to  products  it  produces  in  the  future  without  imposing  on  itself  any  obligations  to 
install the same improvements in the products it has previously manufactured. 

9. 

This Limited Warranty gives the Original Purchaser specific legal rights but there may be other rights 
which vary by jurisdiction. 

10.  This warranty does not cover the following items: 

  Chips or scratches on porcelain or painted surfaces. 

  Rust or corrosion is not deemed a manufacturing or materials defect. 

  Discoloration or loss of paint due to handling during assembly, heat or cleaning products. Paint 

may require touch up. 

  Stainless steel discoloration or corrosion. 

  Consumables such as batteries. 

 

IF CUSTOMER SERVICE BECOME NECESSARY:

 

1. 

The Original Purchaser is responsible for shipping and handling charges of the returned item(s) 
and replacement parts, if any. 

2. 

All parts to be replaced will need to be shipped before replacement items will be sent. 

3. 

Follow the Customer Service Representative’s instructions exactly. If a return is necessary, it must 
be packed carefully and shipped prepaid. 

 

Should you encounter any problem, 

CALL US FIRST. 

Do not return product to the store. 

WE CAN HELP. 

 

For assistance, contact customer service at 

[email protected]

 

or at 1-888-837-1380, Mon to Fri, 8:00am – 5:00pm Pacific Standard time 

 

Manufacturer information 

Rankam (China) Manufacturing Company Limited 

Address: 18/F,. New Lee Wah Centre, 88 Tokwawan Road, Kowloon, Hong Kong. 

Summary of Contents for Member's Mark GR2298901-MM-02
































Reviews: