9
●
Connect USB cables to the cameras and to the computer. Cameras should be connected to
your PC after the drivers installation without any hubs or adapters.
●
Connect the power cord
11
(5m cable) to the projector and turn on the projector.
●
Connect HDMI cable to the projector and to the computer.
●
Insert the electronic key
8
into a free USB port.
●
Connect the rotary table
14
(if equipped)
to your computer using the USB cable, connect the
power cord (3m cable).
Installing software and drivers
Get the RаngeVisiоn software (equipped with the scanner) and run the installer -
RаngeVisiоn SсаnCenter
setup.
Following the prompts, select the desired language, type and path for installation. After the files have been
copied install drivers and graphics libraries, necessary for the correct operation of RangeVision 3D scanner.