Some advice on calibration:
Do not change the distance from the center of the plate to the scanner when turning
the plate. The exception are only snapshots in positions 10 and 11.
Do not rotate the plate at a very high angle. Ensure that all marks on the plate are
visible from both cameras, when you turn the table.
Be careful with calibration plates! It is not permitted to contaminate or perform any
mechanical damage to the surface with the marks. After the use store the plates in
designated case.
Before the calibration procedure ensure that cameras and cables are secure in the
designated position.
After calibration the calibration plate should be put inside the carrying case in order
to avoid the damage or contamination!
19