RBJ-30TL
30-Ton Air Bottle Jack
4
P/N 5900031 — Rev. B — Jan. 2020
Safety Considerations
Read this manual carefully before using your new product.
Do not install or operate the product
until you are familiar with all operating instructions and warnings. Do not allow anyone else to
operate the product until they are also familiar with all operating instructions and warnings.
Safety Information
Please note the following:
•
The product is a telescoping air bottle Jack.
Use it only for its intended purpose.
•
The product must only be used on a hard, dry, flat surface.
•
Never
exceed the rated capacity of the Jack.
•
The product must only be operated by authorized personnel.
•
When the product is in use, keep all body parts away from it.
•
Do not use the product while tired or under the influence of drugs, alcohol, or medication.
•
Do not make any modifications to the product.
•
Make sure all operators read and understand the
Installation and Operation Manual
. Keep the
manual near the device at all times.
•
Make a visual inspection of the product before using it. Do not use the product if you find any
missing or damaged parts. Instead, take the unit out of service and then contact an authorized
repair facility, your distributor, or BendPak Ranger at
(805) 933-9970
.
Symbols
Following are the symbols used in this manual:
⚠
DANGER
Calls attention to a hazard that
will
result in death or injury.
⚠
WARNING
Calls attention to a hazard or unsafe practice that
could
result in death or injury.
⚠
CAUTION
Calls attention to a hazard or unsafe practice that could result in personal injury,
product damage, or property damage.
Tip
Calls attention to information that can help you use your product better.
Liability Information
BendPak Ranger assumes
no
liability for damages resulting from:
•
Use of the equipment for purposes other than those described in this manual.
•
Modifications to the equipment without
prior
,
written
permission from BendPak Ranger.
•
Injury or death caused by modifying, disabling, overriding, or removing safety features.
•
Damage to the equipment from external influences.
•
Incorrect operation of the equipment.
