Ranger R980AT Installation And Operation Manual Download Page 31

Page: 31 / 88

R980 Series of Tire Changers

P/N 5900158 — Rev. F - March 2022

Air Pressure Gauge

Shows the air pressure in Tires to which the Air Chuck is attached.
The components of the Air Pressure Gauge are:
•

Gauge

. Displays air pressure in the Tire to which the Air Chuck is attached.

•

Pressure Relief Button

. Removes air if a Tire gets overinflated.

•

Cord

. Extends and retracts so you can get the Air Chuck to the Valve Stem.

•

Air Chuck

. Attaches to the threads on the Valve Stem. Includes a self-gripping clip so you do

not

have to hold the Air Chuck in place during inflation.

⚠

WARNING

Do not hold the Air Chuck while you are inflating a Tire

. This leaves you

close to the Tire, which could result in injury if there is a problem during inflation.

•

Threads

. Store the Air Chuck here using the self-gripping clip.

Front view. Not necessarily to scale. Not all components shown.

To see the pressure in a Tire

: Attach the Air Chuck to the Tire; the Air Gauge shows the air

pressure currently in the Tire. You do

not

need to press the Inflation Foot Pedal.

To see pressure during Tire inflation

: Attach the Air Chuck, move away from the Tire, then

press down the Inflation Foot Pedal. The Air Gauge shows the air pressure in the Tire as it inflates.

Summary of Contents for R980AT
























































































Search results

Summary of Contents for R980AT

Reviews:

Brands by name

Popular brands

Ranger R980AT, Installation And Operation Manual

Search results

Summary of Contents for R980AT

Reviews:

Brands by name

Popular brands