For technical support, contact us at 1-800-565-5321
3010-RP Installation Guide
| REV. D1 | Page
11
2.2.3
Driver and passenger sides preparation.
TOOLS
q
Cordless Drill
q
1" Hole Saw
TOOLS
q
Marker
Drill through the plastic using the hole saw.
Put the partition in place, then put a mark
on the van through the holes of the driver
and passenger side panels.
TOOLS
q
Cordless Drill
q
3/8" Drill Bit or Step Drill
TOOLS
q
Plusnut Tool
Attach plusnuts in the 6 holes.
HARDWARE USED
6×
# 94-130
Plusnut .250
Enlarge the holes if the plusnuts don't fit
and make new holes if they don't align
with the panel on the van.
