background image

3

HOW TO RETURN PRODUCTS

Please contact BendPak / Ranger within 14 days of your 

original shipment or warranty exchange for a Return 

Merchandise Authorization (RMA) number before return-

ing your product to BendPak / Ranger.
For faster service, please have the following informa-

tion on hand when calling for an RMA number: customer 

name, order or invoice number, item (SKU) number and 

serial number (if exists) and the reason for the return. 

In addition to the RMA number, a completed RMA form 

must accompany each shipment of returned merchan-

dise.
No returns of any type will be accepted without an RMA 

number and completed RMA form.
Returned items must be shipped via ground service only.
Do not return items by air unless authorized in writing. 
For warranty related exchanges and/or returns, a 

BendPak customer service representative will work 

with you to arrange to have the item(s) returned via a 

BendPak preferred carrier freight collect.
Products returned C.O.D. will be refused. Unauthorized 

freight collect charges will be denied.
Once an item arrives at BendPak / Ranger, we will issue 

a full or partial credit, exchange or refund within 15 days.
Additional time may be required depending on the nature 

of the return.
Returns must be made within 15 days of the Return 

Authorization being provided. Any incurred costs associ-

ated with damaged merchandise will be deducted from 

credits owed. BendPak / Ranger is not responsible for 

merchandise damaged in return shipment. We strongly 

recommend you package the items carefully to ensure 

safe passage. For non-warranty items, we suggest you 

fully insure your return shipment in case of loss or dam-

age.

 

IMPORTANT SAFETY TIPS

ALWAYS MAINTAIN A CLEAN WORK AREA. 

KEEP VISITORS AND ESPECIALLY

CHILDREN AWAY FROM WORK AREA.

THIS FLOOR JACK IS TO BE OPERATED BY 

PROPERLY TRAINED PERSONNEL ONLY. 

OPERATION BY UNTRAINED 

PERSONNEL MAY RESULT IN INJURY 

AND /OR PROPERTY DAMAGE.

For Parts Or Service Contact:

Ranger Products

1645 Lemonwood Dr.

Santa Paula, CA. 93060

      Tel:  1-805-933-9970

Toll Free: 1-800-253-2363

Fax: 1-805-933-9160

www.rangerproducts.com

Summary of Contents for RFJ-4000AL









Reviews: