background image

4

THIS OPERATING MANUAL CONTAINS 

IMPORTANT DETAILS CONCERNING THE 

SAFE OPERATION OF THIS FLOOR JACK. 

THE USER MUST READ AND UNDERSTAND 

THESE DETAILS BEFORE ANY USE OF THE 

FLOOR JACK. THIS MANUAL MUST BE 

RETAINED FOR FUTURE REFERENCE. 

OWNER/OPERATOR 

RESPONSIBILITY:

 

The owner and/or operator shall study the product in-

structions and retain them for future reference. 

The owner and/or operator shall have an understanding 

of the product operating instructions and warnings before 

operating the jack. 

Warning information shall be emphasized and under-

stood. If the operator is not fluent in English, the product 

instructions and warnings shall be read to and discussed 

with the operator in the operator’s native language by the 

purchaser/ owner or his designee, making sure that the 

operator comprehends its contents. 

INSPECTION

Visual inspection should be made before each use of the 

jack. This inspection should check for abnormal condi-

tions such as cracked welds, leaks, and damaged, loose 

or missing parts. 

Any jack that appears to be damaged in any way, is found 

to be worn or operated abnormally, must be removed 

from service immediately.

Any jack that operates abnormally shall be removed from 

service until repaired by a qualified repair service center. 

If the jack is accidentally subjected to an abnormal load 

or shock, it must be taken out of service immediately and 

be inspected by a qualified repair or service center. 

It is recommended that an annual inspection is performed 

on the jack and that any damaged or worn parts, decals 

or warning labels be replaced with manufacturer’s speci-

fied parts. 

ALTERATIONS 

Because of potential hazards associated with this type of 

equipment, no alterations shall be made to the product. 

FOR YOUR SAFETY AND TO PREVENT INJURY: 

Use Service Jack for lifting purposes ONLY. 

Always support vehicle with jack stands. 

WARNING!

THIS IS A LIFTING DEVICE ONLY. DO NOT MOVE OR 

DOLLY THE VEHICLE WHILE ON THE JACK. 

IMMEDIATELY AFTER LIFTING, SUPPORT THE

 VEHICLE WITH APPROPRIATE MEANS. 

DO NOT EXCEED RATED CAPACITY. 

OVERLOADING CAN CAUSE DAMAGE TO 

OR FAILURE OF THE JACK. 

LIFT ONLY ON AREAS OF THE VEHICLE AS 

SPECIFIED BY THE VEHICLE MANUFACTURER. 

KEEP HANDS AND BODY CLEAR OF ALL PINCH 

POINTS.

CENTER LOAD ON SADDLE PRIOR TO LIFTING. 

OFF-CENTER LOADS MAY CAUSE DAMAGE TO 

JACK, LOSS OF LOAD, PROPERTY DAMAGE, 

PERSONAL OR FATAL INJURY. 

THIS JACK IS DESIGNED FOR USE ONLY ON HARD 

LEVEL SURFACES CAPABLE OF SUSTAINING THE 

LOAD. USE ON OTHER THAN HARD LEVEL 

SURFACES CAN RESULT IN JACK INSTABILITY AND 

POSSIBLE LOSS OF LOAD. 

NO ALTERATIONS TO THE JACK SHALL BE MADE. 

READ, STUDY AND UNDERSTAND THE OPERATING 

MANUAL PACKED WITH THIS JACK BEFORE 

OPERATING. 

FAILURE TO HEED THESE WARNINGS MAY RESULT 

IN LOSS OF LOAD, DAMAGE TO JACK, AND/OR 

FAILURE RESULTING IN PROPERTY DAMAGE, 

PERSONAL OR FATAL INJURY. 

Summary of Contents for RFJ-4000AL









Reviews: