Ranger Products R715, Installation And Operation Manual

Page: 8 / 36

8
FEATURES / SPECIFICATIONS MODEL R715
Type of Drive System Air / Electric
Motor Dual Voltage 110/220V 50/60HZ 1 Ph.
Air Requirement 140-165 PSI (10-11 BAR)
Wheel Clamping Method 4 Rim-Guard Clamps - Internal / External
Table Clamping System Dual Pneumatic Cylinders
Bead Breaking System Pneumatic Blade
Turntable Speed -360-Degree Rotation 6.9 Seconds
Tool Holder Manual Lock
Adjustable Turntable Clamps Standard
In fl ation System Standard
Water Filter Standard
Oiler / Lubricator Standard
Air Regulator Standard
Bead Lifting Tool Standard
Large Soap / Lubricator Bucket Standard
Brush Standard
Tower Design Rigid Fixed
Tire In fl ation Standard
Internal Rim Clamping Capacity * 11" – 20" (279 mm – 508 mm)
External Rim Clamping Capacity * 10" – 19" (254 mm – 483 mm)
Turntable Tire Width Capacity (Mounting) 4.5" – 17.5" (114 mm – 444 mm)
Bead Breaker Tire Width Capacity (Demounting) 1" – 12" (25 mm – 305 mm)
Maximum Tire Diameter 40" (1016 mm)
Shipping Weight 482 lbs. (219 Kg)
Speci fi cations are subject to change without notice.
* NOTE: Internal and External Rim clamping dimensions do not translate directly to rim or tire sizes as rim clamping
points may vary by manufacturer.
SECTION 5
FEATURES / SPECIFICATIONS: MODEL R715
1. Pallet jack or forklift for moving crate.
2. Shop
crane.
3 Utility knife.
4. Crow bar or pry bar.
5. Tin Snips or Sheet Metal Snips
6. Hammer.
7. Open end metric wrenches and/or socket set.
8. Phillips and Slot head screw drivers.
9. Metric Allen Key set.
Parts required but not supplied.
1. Te fl on tape
2. Air fi tting to match shop Air Supply line.
3. Tool Oil.
4. Anchor Bolts and Shims (if Anchoring)
TOOLS REQUIRED FOR ASSEMBLY and INSTALLATION