Ranger Products BendPak P-6, Installation And Operation Manual

Page: 8 / 32

8
QTY DESCRIPTION PART # CHECK
2
Main Frame Asemblies
5215001 LH
5215002 RH
1 Hydraulic Power Unit 5585094
1 Motor Stand 5600001
4 1 1/2” Rubber Blocks 5300845
1 1/2” JIC 90° 1/4” SAE; 6801-8-6; 90* Fitting (Power Unit) 5550497
3 3/8” NPT - 1/2” S.A.E.; 2404-8-6; Straight Fitting; (Flow Divider) 5550132
1 Flow Divider 5590135
4 Hex Nut M8 x 1.25 5535356
4 HHB M 8 x 1.25 x 20 5530304
4 Spring Lock Washer M8 5545202
1 Hyd. Hose Assy. 12.7mm x 3640mm; DS; P-6,P-6F 5570147
2 Hyd. Hose Assy. 12.7mm x 3130mm; DS; P-6,P-6F 5570148
8 3/4” x 4” WEJIT Anchor bolts 5530455
PACKING LIST
When removing the lift from shipping pallet / angles pay close attention as the
lift assemblies can slide and can cause injury.
Prior to removing any strapping or shipping bolts make sure the lift is held
securely by a fork lift or some other heavy lifting devise.
CAUTION!
This lift should be installed by qualified lift installers only who are familiar with this particular lift
model and the requirements thereof. The frame on this lift MUST NOT be twisted, bent or
misaligned by unlevel floors or improper anchoring. Misalignment may cause damage to the lift.