manualshive.com logo in svg

Rangemaster Toledo FS Hob, Installation And User Manual, Page: 22 / 24

Share
Download
Rangemaster Toledo FS Hob Installation And User Manual Download Page 22

18

8.  Technical Data

THE HOB IS CATEGORY:

 II2H3+. 

It is supplied set for group H natural gas. A conversion kit from NG to LP is available for the cooker.

INSTALLER: 

Please leave these instructions with the User.

DATA BADGE LOCATION: 

Hotplate base.

COUNTRY OF DESTINATION:

 GB, IE.

Connections

Gas 

(Rp ½ at rear right-hand side)

Electric

Natural gas

20 mbar

230/400 V 50 Hz

Butane

29 mbar

Propane

37 mbar

See the appliance badge for test pressures.

Dimensions

Overall width

1173 mm

Overall depth

499 mm

Minimum height to the hotplate

650 mm

Refer to 

‘Positioning the Hotplate’.

Ratings

Hotplate

Bypass Screw*

Natural Gas 20 mb

LP Gas

Injector

Injector

Wok burner

57

3.5 kW

internal 78

3.5 kW (246 g/h)

internal 53

external 126

external 82

Large burner

40

3.0 kW

134

3.0 kW (210 g/h)

87

Medium burner

32

1.7 kW

109

1.7 kW (119 g/h)

68

Small burner

28

1.0 kW

75

1.0 kW (70 g/h)

51

* The valves in this cooker are fitted with adjustable bypass screws. The cooker is supplied with the bypass screws set for 

Natural gas. For LPG conversion the bypass screws must be screwed all the way down.

Maximum total electrical load at 230 V

 (approximate total)

:

 50 W.

Summary of Contents for Toledo FS Hob

























Reviews:

No comments