background image

9

4. Installation

Installation Requirements

Before starting to use your wine cabinet, you should pay 

attention to the following:

•  Operating voltage for your wine cabinet is 220-240V at 

50Hz.

•  We do not take the responsibility of the damages 

that occur due to ungrounded usage. Please refer to 

“Electrical Connection” on page 13

.

•  Do not place your appliance in direct sunlight.

•  Your appliance should be at least 50 cm away from 

stoves, gas ovens and heaters, and should be at least 

5 cm away from electrical ovens.

•  Your wine cabinet should never be left outdoors.

•  When your wine cabinet is placed next to a deep freezer, 

there should be at least 2 cm between them to prevent 

humidity on the outer surface.

•  Before using your wine cabinet, wipe all parts with 

warm water then rinse and dry. Place all parts back in 

the appliance after cleaning.

•  The installation of this appliance is best carried out by 2 

people.

•  Dispose of all packaging carefully and responsibly.

•  The appliance is designed for indoor use only and 

must be protected from rain, moisture and extreme 

temperature variations.

•  This appliance is designed for household use. Do not 

use the appliance for industrial and commercial use.

•  The appliance MUST be positioned on a firm level base.

Unpacking

Please make sure that when unpacking your appliance that 

it is carried out in a safe manner. Ensure the packaging is 

disposed of in accordance to local regulation.

 

n

Do not allow children to play with the packaging 

material, e.g. plastic bags and wrappings. Danger of 

suffocation

Screws x 2

Washers x 2

Accessories Included

Summary of Contents for RWC 3018 BL

























Reviews: