background image

INSTALLATION

Check the appliance is electrically safe and gas sound when you have finished.

19

Checking the Parts:

Location of Cooker

The cooker may be installed in a kitchen/kitchen diner but 

NOT in a room containing a bath or shower.

This appliance is designed for domestic cooking only. Use 

for any other purpose could invalidate any warranty or 

liability claim.
Note:

 An appliance for use on LPG must not be installed 

in a room or internal space below ground level, e.g. in a 

basement.

Conversion

This appliance is supplied set for G20 20 mbar Cat II2H3+.
A conversion kit for another gas is available for the cooker.
If the appliance is to be converted to another gas we 

recommend that this is carried out before installation. 
After converting the appliance, please attach the Gas 

Conversion sticker over the appropriate area of the data 

badge – this will identify the gas type for which the appliance 

is now set.

You will need the following equipment to complete the 

cooker installation satisfactorily:

• 

Stability bracket: If the cooker is to be supplied with 

gas through a flexible hose, a stability bracket or chain 

MUST be fitted. 

These are not supplied with the cooker

 but are 

available at most builders’ merchants.

• 

Gas pressure tester/manometer.

• 

Flexible gas hose: Must be in accordance with the 

relevant standards.

• 

Multimeter: For electrical checks.

You will also need the following tools:
1. 

Electric drill

2. 

Masonry drill bit (only required if fitting the cooker on a 

stone or concrete floor)

3. 

Wall plugs (only required if fitting the cooker on a stone 

or concrete floor)

4. 

Steel tape measure

5. 

Cross head screwdriver

6. 

Flat head screwdriver

7. 

Spirit level

8. 

Pencil

9. 

Allen keys (supplied)

10. 

Adjustable spanner

11. 

Screws for fitting stability bracket

12. 

13 mm spanner or socket wrench

4 pan supports

Wok cradle

ArtNo.255-0012 - 

110DF - Elise pan supports

ArtNo.000-0009 Wok ring, cast

2 flat shelves

2 drop shelves

Handyrack

Roasting tin & trivet

ArtNo.324-0003 Handyrack

Plinth

ArtNo.350-0008 - 90 SC plinth

Summary of Contents for Elise 110 Dual Fuel





































Reviews: