background image

MINI TRACKED DUMPER

4

GB

Protect eyes, face, and head from objects that 
may  be  thrown  from  the  unit.  Always  wear 
safety  goggles  or  safety  glasses  with  side 
shields when operating.

Wear appropriate hearing protection.

Always  keep  hands  and  feet  away  from  all 
moving parts during operation. Moving parts 
can cut or crush body parts.

Always  keep  hands  and  feet  away  from  all 
pinch points.

Do  not  touch  parts  that  might  be  hot 
from  operation.  Allow  parts  to  cool  before 
attempting to maintain, adjust, or service.

Stay alert, watch what you are doing, and use 
common sense when operating the machine.

Do not overreach. Do not operate the machine 
while  barefoot  or  when  wearing  sandals  or 
similar lightweight footwear. Wear protective 
footwear  that  will  protect  your  feet  and 
improve  your  footing  on  slippery  surfaces. 
Keep proper footing and balance at all times. 
This enables better control of the machine in 
unexpected situations.

Inspect Your Machine

Check your machine before starting it. Keep 
guards  in  place  and  in  working  order.  Make 
sure all nuts, bolts, etc., are securely tightened.

Never operate the machine when it is in need 
of repair or is in poor mechanical condition. 
Replace  damaged,  missing,  or  failed  parts 
before using it. Check for fuel leaks. Keep the 
machine in safe working condition.

Do not use the machine if the engine’s switch 
does  not  turn  off  the  engine  when  running. 
Any gasoline powered machine that can’t be 
controlled with the engine switch is dangerous 
and must be replaced.

Regularly check to see that keys and adjusting 
wrenches are removed from the machine area 
before  starting  it.  A  wrench  or  a  key  that  is 
left attached to a rotating part of the machine 
may result in personal injury.

Avoid accidental starting. Be sure the engine’s 
switch is off before transporting the machine 
or  performing  any  maintenance  or  service 

Understand Your Machine

Read  this  manual  and  labels  affixed  to  the 
machine  to  understand  its  limitations  and 
potential hazards. 

Be thoroughly familiar with the controls and 
their proper operation. Know how to stop the 
machine and disengage the controls quickly.

Make  sure  to  read  and  understand  all  the 
instructions and safety precautions as outlined 
in the Engine Manufacturer’s manual packed 
separately with your unit. Do not attempt to 
operate the machine until you fully understand 
how  to  properly  operate  and  maintain  the 
engine  and  konw  how  to  avoid  accidental 
injuries and/or property damage.

If the unit is to be used by someone other than 
original purchaser, or is to be loaned, rented, 
or sold, always provide this manual and any 
needed  safety  training  before  operation. 
The  user  can  prevent  and  is  responsible 
for  accidents  or  injuries  that  may  occur  to 
themselves, to other people, or to property.

Do  not  force  the  machine  beyond  its  limits. 
Use the correct machine for your application.

Personal Safety

Do not permit children to operate this machine 
at any time.

Keep  children,  pets,  and  other  people  not 
using  the  unit  away  from  the  work  area.  Be 
alert  and  shut  off  the  unit  if  anyone  enters 
work area. Keep children under the watchful 
care of a responsible adult.

Do not operate the machine while under the 
influence of drugs, alcohol, or any medication 
that could affect your ability to use it properly.

Dress properly: Wear long, heavy pants, work 
boots,  and  work  gloves.  Do  not  wear  loose 
clothing, short pants, or jewelry of any kind. 
Secure long hair so it is above shoulder level. 
Keep  your  hair,  clothing,  and  gloves  away 
from moving parts. Loose clothes, jewelry, or 
long hair can be caught in moving parts.

SAFETY

General Safety Rules

Summary of Contents for RR560

























Reviews: