EcoPro
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
Page 13
Fig. 7
When returning to the home position, if the ram hits hard, stalls the engine or lugs the engine, loosen
these 2 -13mm nuts at the front of the ram cover and slide the bracket to the right, when adjusting
this the ram face should stick out 1-2mm from the blue processor body, if the face sits inside the
processor body metal then adjust the bracket more to the right until it sits even or slightly protrudes
from the body.
Fig. 8
The hydraulic bypass valve at the back of the Splitter/Chainsaw Safety Cover puts the hydraulic
circuit for the chainsaw and ram into bypass when the cage is open and they can not operate. When the
cage is closed this valve must be fully depressed or partial bypass will happen and you will have less saw
speed and ram power.
