OWNER’S MANUAL
19
TTM57mkII
Class Compliant USB Ports
The USB ports are 100% class compliant, allowing hook-up to any Mac OSX device without the need for
an additional driver. A high-performance ASIO driver runs most Windows DAW and DJ software. MIDI end
points are class compliant with both OSX and Windows devices.
ASIO (Windows)
A low-latency ASIO driver is available to interface with most DJ and DAW audio software applications
on Windows operating systems. Multi-client ASIO allows different audio software applications to
simultaneously stream audio to and from the TTM57mkII. If the same playback channel is selected in
more than one application, the driver mixes the audio from the applications before streaming it to the
device. The driver Control Panel may be launched from the Windows Control Panel. Select Start > Control
Panel > Rane Products. The Serato DJ installer includes the ASIO driver and Rane Control Panel for
Windows 7-SP1, Windows 8 and 8.1.
Core Audio (Macintosh)
No driver installation is required. Connect the TTM57mkII to a Mac running OSX, and the mixer inputs
and outputs become available in your audio program. Install the Rane control panel to provide additional
mixer settings as described below. The most recent control panel installer may be downloaded from the
TTM57mkII page at dj.rane.com. The Serato DJ installer includes the Rane Control Panel for Mac OSX.
Rane Control Panel
NOTE:
Settings are saved in the mixer. The control panel for Windows or Macintosh is
updated with the mixer’s settings. Therefore, when you connect to a different TTM57mkII
Mixer, it's saved settings override your previous Control Panel settings.
Settings
The TTM57mkII allows you to save and export settings. You can load your preferences when using a
different TTM57mkII than your own, or putting things back after another DJ has used your mixer.
Once you have set Rane Control Panel preferences, click
Export
to write these to a computer file. Click
Import
to load a .rms settings file. The Control Panel shows the current settings file loaded in the mixer.
If any changes are made since the last import, [Modified] will appear after the filename along with a
Save
button, offering to save your changes as the new default.
Firmware
The TTM57mkII Firmware Version currently installed in the mixer is shown in the active Rane Control
Panel. The
Downloads
link on the TTM57mkII page at
dj.rane.com
is a place to check if there is a
control panel / firmware update. Newer versions of Serato DJ may also contain firmware updates.
After downloading and installing, if the TTM57mkII firmware installed on your computer is newer than
the firmware in your mixer, an
Update Firmware
button is enabled. Pressing the button updates the
TTM57mkII firmware to the new version.
