2.REMOVAL OF THE CONTROL PCBA AND P/S PCBA AND MOTOR (ASSEMBLY). (Fig2)
(A) REMOVE THE FADER SHAFT CAP AND
1 PC
KNOB AND 2 PCS FFC AND 3 PCS LINE.
(B) REMOVE THE 23 PCS SCREWS.
(C) TAKE OUT THE CONTROL PCBA.
(D) REMOVE THE 11 PCS BUTTON FROM THE CONTROL PCBA.
(E) UNPLUG THE 1 PCS CONNETOR BEFORE REMOVAL OF THE P/S PCBA.
(F) TAKE OUT THE 3 PCS BUTTON AND THE BUTTON FRAME AND SPRING.
(G) REMOVE THE 4 PCS SCREWS AND 4 PCS WASHERS BEFOR REMOVAL OF THE MOTOR.
Fig.2
