SPECIFICATION
FUNCTION
1. Motor On/off Switch--------------------------2 Way switch mounted to the Strobe.
2. Start/Stop Switch------------------------------When this button is pressed it will start and stop the platter.
LED State: Green when song is playing, Red when platter is stopped.
3.33/45 Rpm switches---------------------------Tact Switch with Plastic Button
4.Pitch Range Select-----------------------------The buttons control pitch ranges (8, 16, 50 percent).
5.Pitch Slider--------------------------------------This fader will adjust the pitch or speed of the track. There are 3 LEDs that
Work with the pitch slider. One is center detent. The other 2 are for pitch
adjustment takeover mode. Pitch takeover will guide the end user when they
change deck layers to the exact spot of where the pitch slider is currently set
to. LED state: Bright when active.
6.Needle Drop/Hot Cues------------------------Primary: This touch strip will seek through the loaded track.
LED state: Bright when active.
Secondary: Will trigger hot cues when Cue mode button is active.
When in Cue Mode the LED State is as follows: Bright when a hot cue is set.
7.Needle Drop/Cue Mode button---------------This button will toggle the Touch strip between Needle drop and hot cue modes.
LED State: Dim/off, Bright when CUE MODE is active
8.Deck Focus Buttons---------------------------DECK 1 (Tact Switch w/Red LED) [MIDI]:When this button is pressed it will
set deck 1 as the active deck via MIDI. Deck 1 will use MIDI Ch. 1 (Transport)
and MIDI Ch. 5 (Other Functions. This will be specified with greater detail in
the MIDI spec).
DECK 2 (Tact Switch w/Red LED) [MIDI]: When this button is pressed it will
set deck 2 as the active deck via MIDI. Deck 2 will use MIDI Ch. 2 (Transport)
and MIDI Ch. 6(Other Functions. This will be specified with greater detail in
the MIDI spec).
LED State: Dim/off, Bright when active
DECK 3 (Tact Switch w/Red LED)[MIDI]:When this button is pressed it will
set deck 3 as the active deck via MIDI. Deck 3 will use MIDI Ch. 3 (Transport)
and MIDI Ch. 7 (Other, Functions. This will be specified with greater detail in
the MIDI spec).
LED State: Dim/off, Bright when active
DECK 4 (Tact Switch w/Red LED) [MIDI]: When this button is pressed it will
set deck 4 as the active deck via MIDI. Deck 4 will use MIDI Ch. 4 (Transport)
and MIDI Ch. 8 (Other Functions. This will be specified with greater detail in
the MIDI spec).
SERVICE MANUAL
ＭＯＤＥＬ：ＴＷＥＬＶＥ ＭKII
