background image

Manual-3

REAR PANEL DESCRIPTION 

1

 AC Power IEC input

 accepts electrons to power up the AM1. Though it is first in this list, it’s best to connect it last.

2

 

FAULT

 indicator 

lights when something goes awry.

 

LOCATE

 indicator 

flashes when toggled from the Mongoose Tracker software. When using multiple AM1 devices in a Rane  

 

Mongoose-based CobraNet™ system, this uniquely identifies a specific AM1.

 

USB

 indicator 

lights when a Windows or Apple operating system recognizes the AM1 as a stereo I/O sound card.

 

POWER

 indicator 

glows when flowing electrons pass in and out of the AC Power IEC input.

3

 

USB AUdIO

 connector 

allows simultaneous 16-bit, 48 kHz playback and recording via a computer. The AM1 registers as a 

standard sound card with either Windows or Apple operating systems.

4

 

CASCAdE IN

 port 

permits adding up to 56 more microphones to the AM1’s 4 mic inputs using up to 7 Rane AM2 automixers, 

sold separately. Use shielded Ethernet CAT 5 cable connected from the AM2’s Cascade Out.

5

 

RAd PORT

 

connects to a Rane Mongoose’s Remote Audio Device port to transport the single-channel, Main Mix of the AM1 to 

a CobraNet network or another Remote Audio Device.

6

 

CASCAdE IN

 & 

RAd PORT

 status indicators 

prove that proper cable termination and device configuring has occurred when all 

four indicators illuminate. If any of these are off or flashing, a configuration or wiring error is the culprit.

7

 

MAIN OUTPUT

 XLR connector 

contains the main mix of all mics, Aux 1, Aux 2 and USB Audio input signals. The front panel  

 

Output Level control adjusts the level exiting this jack.

 

MIC/LINE

 Output switch 

changes this Main XLR Output to mic-level, for feeding the output mix to a mic input device; or    

line-level for feeding line-level input devices.

8

 

RECORd

 Output RCA jacks 

contain the same audio mix as the Main Output. The signal is not affected by the Output Level 

control.

9

 

USB CHARgE-ONLy

 port 

powers and charges many USB devices such as iPods®.

0

 

AUX INPUT 2

 stereo 3.5 mm jack 

is internally monoed immediately and useful for connecting MP3 players of all kinds.

q

 

AUX INPUT 1

 dual RCA jacks 

are internally monoed immediately and enjoy being fed audio from CD, DVD, 8-Track tape 

players, reel-to-reel machines, docking stations or iPhone®, iPod® or iPad® headphone jacks.

w

 

MIC INPUTS 1

 thru 

4

 

accept dynamic or condenser microphones, or the output of a wireless microphone receiver. These inputs 

are optimized for speech and have a fixed 100 Hz low-cut and 7 kHz high-cut filter. Both filters are 2nd-order Butterworth filters.

e

 3-position 

MIC/LINE

 switches 

support 48 volt phantom power Mic position for condenser mics, zero volt Mic position for 

dynamic mics, and the Line position intended for wireless mic receiver outputs.

100-240V

13 WATTS

50/60 Hz

MADE IN

U.S.A.

RANE CORP.

USB

LOCATE

FAULT

POWER

ACN 001 345 482

24 VDC @ 100 mA

AM1

MAIN OUTPUT

CASCADE IN

RAD PORT

AUX

INPUTS

MIC INPUTS

1

2

3

4

1

2

RECORD

USB

AUDIO

POWER

COMM

AUDIO RX

AUDIO TX

MIC +48V MIC +0V LINE

MIC +48V MIC +0V LINE

MIC +48V MIC +0V LINE

MIC +48V MIC +0V LINE

5 VDC @ 500 mA

USB     

 

CHARGE ONL

Y    

 

MIC LINE

THIS DEVICE COMPLIES 

WITH PART 15 OF THE FCC 

RULES FOR A CLASS 'B' 

COMPUTING DEVICE.

CLASS 2 WIRING

1

2 3

4

5

8

9 q

w

6 7

e

0

Summary of Contents for AM1









Reviews: