Instrument tour
R&S
®
ZCxxx
14
Getting Started 1177.5156.02 ─ 05
Figure 4-2: Test port adapter of R&S
ZC330
Risk of damaging waveguide flanges
The waveguide flanges of the converter and of the test port adapters must
be protected against scratches and other mechanical damages. Further-
more the waveguides must be shielded from dust.
Protect the waveguide flange of the converter by leaving the test port
adapter mounted. When the converter is not in use, slip a protective cap
onto the adapter.
Mounting a DUT
Mount the DUT to the test port adapter at the front of the converter. Use the inclu-
ded screws and hex ball driver. For higher precision, a torque-controlled hex ball
driver R&S
ZV-Z1000 is available as an accessory (order number 1314.5467.02).
An angled hex ball driver facilitates working in the tight space between rear side
of the test port adapter flange and converter front side (see
).
Rohde&Schwarz offers three variants:
●
R&S
ZCAW (order number 1175.1960.00) without torque control
●
R&S
ZCTW with 0.58
N
·
m torque limit (order no. 1175.2014.02)
●
R&S
ZCTW with 0.2
N
·
m torque limit (order no. 1175.2014.03)
Test port adapter (waveguide flange)
