R&S TSMA6B, Getting Started

Page: 56 / 70

Configuring the R&S TSMA6B
R&S
®
TSMA6B
56 Getting Started 4901.4010.02 ─ 02
The selected mode is active when the status bar indicates "No error". The
scanner "State" LED starts blinking rapidly.
The NESTOR measurement is started and controlled from the host PC.
For more details about the R&S NESTOR configuration and usage, refer to the
user documentation for R&S NESTOR.
6.2.1.5 SmartONE mode
The SmartONE modes are only displayed if SmartONE software is installed
(see
R&S TSMA6B user manual ).
To use the R&S TSMA6B with R&S SmartONE, the following steps must be per-
formed.
1. In the web GUI, set the "Mode of Operation" to one of the following SmartONE
modes and press "Submit".
● "SmartONE Standard"
Activating this mode, a web-based UI with the SmartBenchmarker applica-
tion software, designed for efficient data collection and remote control sup-
port in combination with SmartMonitor can be used.
● "SmartONE Expert"
Activating this mode, an expert UI with the ROMES4 application software
for complex measurement tasks and detailed data investigation during the
measurement can be used.
For the initial settings after installation, see
R&S TSMA6B user manual .
● "Smart Monitor"
Activating this mode, a central, web-based module for controlling and mon-
itoring a fleet of QualiPoc android probes can be used.
Selecting mode of operation