R&S TSMA6B, Getting Started

Page: 34 / 70

Instrument tour
R&S
®
TSMA6B
34 Getting Started 4901.4010.02 ─ 02
6 = DC IN connector
7 = Docking connector
8 = Restore button
9 = Status LEDs - Mode, Meas
10 = POWER ON/OFF
11 = USB-C (1x)
12 = HDMI connector (2x)
13 = USB 3.0 (1x) / USB 2.0 (1x)
14 = LAN port - remote control
15 = Status LEDs - Scanner Pwr / State
16 = GPS Ant. connector (SMA) - GPS antenna input
17 = RF In connector
WLAN/Bluetooth ON/OFF
Switches WLAN and Bluetooth on and off.
SCAN port (RJ45 connector)
The SCAN port provides a high-speed 1 Gbit Ethernet interface with an RJ 45
connector. It is used to connect the R&S TSMA6B to a separate R&S TSME6 as
a second scanner used for MIMO scenarios and for increasing bandwidth and
measurement rate.
LAN port - remote control (RJ45 connector)
The LAN port provides a high-speed 1 Gbit Ethernet interface with an RJ 45 con-
nector. It is used to connect the R&S TSMA6B to a LAN/WAN.
The LAN interface can be used for the following scenarios.
●
Remote Control via web-GUI
●
Remote Control via Remote Desktop Connection
●
LAN interface in NESTOR Probe Mode
LAN port LEDs:
●
left LED / yellow = link status
●
right LED / green = activity status
Rear panel view