R&S TSMA6B, Getting Started

Page: 54 / 70

Configuring the R&S TSMA6B
R&S
®
TSMA6B
54 Getting Started 4901.4010.02 ─ 02
Figure 6-5: Scanner ready
For more details about the QualiPoc configuration and usage, refer to the user
documentation of QualiPoc
®
.
6.2.1.4 NESTOR and NESTOR probe mode
The NESTOR mode is only displayed if the NESTOR setup is installed (see
R&S TSMA6B user manual ).
General
●
NESTOR mode
The NESTOR UI engine and the NESTOR measurement engine are hosted
on the R&S TSMA6B.
●
NESTOR probe mode
The R&S TSMA6B hosts only the NESTOR measurement engine. The NES-
TOR UI engine is hosted on a remote PC connected via LAN/WLAN with the
R&S TSMA6B. This master PC is required to control the measurement.
Prerequisites
●
For NESTOR mode only:
– NESTOR workspace file imported (see
"Import NESTOR workspace file"
on page 58
– NESTOR license dongle connected to a USB port
●
For NESTOR probe mode only:
– WAN / LAN connection with the NESTOR host (see
Chapter 4.8, "Con-
necting to LAN/WAN from a remote PC" , on page 27)
Selecting mode of operation