background image

Usage of the Web GUI

R&S

®

TSMA6

133

User Manual 4900.8057.02 ─ 06

Backup TSMA6 System

Click "Backup" to create a backup of the system partition 

C:\

.

At first, it is checked, if there is enough memory available for the backup.

Only one user backup can be created at time. An existing backup will be overwrit-
ten after an acknowledgment.

If there is a system failure, the system can be restored by pressing the
"RESTORE" button.

A.7

 

Restart

The "Restart" window allows to restart the complete R&S

 

TSMA6 and the scanner unit

separately.

System restart

............................................................................................................. 133

PowerCycle

................................................................................................................. 133

System restart

To restart the R&S

 

TSMA6, click "Restart".

The following message appears.

Click "OK" to reboot the R&S

 

TSMA6.

PowerCycle

To restart the scanner unit of the R&S

 

TSMA6, click "PowerCycle".

The following message appears.

Click "OK" to reboot the scanner unit of the R&S

 

TSMA6.

Restart

Summary of Contents for TSMA6




























































































































































Reviews: