Update and Restore
R&S
®
TSMA6
91
User Manual 4900.8057.02 ─ 06
Figure 7-12: File Transfer Finished - "The operation completed successfully"
As long as the procedure is running neither the PC should be switched off nor the
Recovery Stick removed.
7.5.5
Deploy a TSMA6 image from a TSMA6 Recovery Stick
Deployment of a TSMA6 image requires a TSMA6 Recovery Stick containing the four
master image files (
GRUB.wim
,
SYSTEM.wim
,
DATA.wim
,
RECOVERY.wim
).
1. Connect the TSMA6 Recovery Stick to an USB 3.0 port of the new R&S
TSMA6
device.
2. Reboot the R&S
TSMA6. The R&S
TSMA6 boots from the Recovery Stick and the
start page of the Recovery Stick is displayed.
During the reboot, information about the target device and the image will be
checked. If all requirements are fulfilled, click "Start Recovery" to start the recovery
procedure, otherwise an error message will be displayed.
Master Image
