![background image](http://html1.mh-extra.com/html/rands/tsma/tsma_getting-started_3085133044.webp)
Configuring the R&S TSMA
R&S
®
TSMA
44
Getting Started 1177.5604.02 ─ 10
Requirements for using the Bluetooth
®
interface
The device must be in the PC Mode. Check it via the Web-GUI ("Overview"
> "Mode of Operation").
1. Switch on Bluetooth
®
on R&S TSMA.
2. The tablet/smartphone must be paired with the R&S TSMA.
Requirements for using the WLAN interface
1. Switch on the WLAN AP on the R&S TSMA.
2. Switch on WLAN on the tablet/smartphone.
3. Connect the tablet/smartphone with the R&S TSMA WLAN AP.
Measurement
To run measurements, the requirements for operating the rViCom Sample App
have to be fulfilled, see
R&S TSMA User Manual
.
1. Activate the rViCom Server mode (see
Chapter 6.3, "Measurement Setup"
2. Start one of the following applications
a) Start the OEM rViCom client application on the mobile device.
b) Start the rViCom Sample App on the mobile device.
For more details, refer to
R&S TSMA User Manual
.
6.4.2
QualiPoc Mode
To use the R&S TSMA with QualiPoc
®
, the following steps must be performed.
Prerequisites
●
A scanner license must be installed on the QualiPoc
®
handheld device.
●
On the R&S TSMA, Bluetooth
®
must be activated and visible.
●
The "Mode of Operation" must be set to "QualiPoc".
1. After selecting mode of operation, the R&S TSMA reboots.
Measurement Modes