Instrument Tour
R&S
®
TSMA
31
Getting Started 1177.5604.02 ─ 10
4 = SCAN (scanner port from scanner)
5 = SCAN (scanner port to embedded PC)
6 = USB 2.0 (2x)
7 = USB 3.0 (2x)
8 = mini HDMI
9 = MINI Display Port
10 = LAN Connector CPU
11 = DC IN Connector
12 = RF IN Connector
13 = GPS Antenna Connector
14 = Antenna 1 Connector (Bluetooth
®
/ WLAN MIMO)
15 = Antenna 2 Connector (WLAN)
16 = RESTORE
POWER ON/OFF
The POWER ON/OFF key turns on and off the device if power is supplied via the
DC IN connector.
STATUS LEDs
The three status LEDs, STATE, SCAN, PWR, indicate the operating status of the
R&S TSMA. For a detailed description, see
AUX Connector
The AUX connector can be used to synchronize the R&S TSMA with the external
10 MHz reference frequency output of a signal generator or to synchronize multi-
ple R&S TSMA/TSME in a MIMO setup; the Sync cable is necessary.
SCAN (2x)
The two SCAN connectors are used to establish a high-speed data link between
the R&S TSMA scanner unit (SCAN connector on the
right
side) and the R&S
TSMA internal PC unit (SCAN connector on the
left
side).
Rear Panel
