R&S SMW-K44, User Manual

Page: 64 / 455

Space Vehicle Configuration Satellite Navigation
64 User Manual 1178.6379.02 ─ 01
Figure 9-3: Power View: understanding the displayed information
R = Ref. Power = -100 dB
1 = "SV ID 1 > Power Offset = -10 dB"
2 = "Signal Power Offsets", e.g. C/A = 0 dB and P = - 3dB; the same power relation is observed SVs
with or without Power Offset and for the multi-path echoes
3 = "SV ID 1 > Echo 1 > Power Offset = -10 dB"
4 = One echo per signal ("Number of Echoes = 1"); displayed if "Echoes = On"
12. Load and enable body mask files to visualize the effect of antennas on the power.
For more information, see Chapter 10.6, "Antenna Configuration Settings" ,
on page 87.
The remote commands required to define these settings are described in:
●
Chapter 19.10, "Signals and Power Configuration per Satellite" , on page 259
● Chapter 19.7, "Static Multipath Configuration" , on page 237.
Settings
State (SV ID) ................................................................................................................. 64
Present in Constellation ................................................................................................ 65
Power Offset ................................................................................................................. 65
Add Power Path-Loss ................................................................................................... 65
Frequency Number ....................................................................................................... 65
SV signal configuration table .........................................................................................66
└ Signal Power Offset ........................................................................................ 66
Copy Power Settings to,SV-ID ...................................................................................... 66
State (SV ID)
Changes the SV ID state on-the-fly.
Per default, only visible satellites can be included in the constellation. SV ID for that
Present in Constellation > "Off" cannot be activated.
Tip: Pressing the ON/OFF TOGGLE key has the same effect on the selected SV ID.
Power Settings