R&S SMJ100A, Operating Manual

Page: 111 / 874

Manual Operation
R&S
®
SMJ100A
95 Operating Manual 1403.7458.32 ─ 14
●
The baseband signal is indicated by a three line arrow, the I- and Q-components of
the signal by a single-line arrow.
●
Connections are indicated by a "solder point".
●
Black is used for the generated signal.
●
Green is used for control signals.
The signal flow is configured in the individual menus. User interfaces are configured in:
●
the "Setup > USER Marker /AUX I/O Settings" dialog and
●
the "Setup > Global Trigger/Clock/External Inputs" dialog.
4.2.5 Winbar and Softkeys
The "Winbar" is displayed below the block diagram. Labelled buttons represent open
menus, the label indicates the menu. If several menus are open, the button of the cur-
rently active menu is displayed in a lighter colour. The buttons also assign functions to
the softkeys of the next lower level for front-panel operation. Up to eight menus may be
open simultaneously. When the ninth menu is opened, the menu that was opened first
is automatically closed.
Some menus, e.g. data and list editor menus, cover the "Winbar" and assign menu-
specific functions to the front-panel softkeys by way of the menu buttons.
Any of the open menus can be activated either with the respective button in the "Win-
bar" or the front-panel softkey. In combination with the keys for menu operation
(CLOSE (ESC), HIDE (CTRL+H) and REARR (CRTL+A)), convenient menu operation
can be ensured.
Working with menus and dialog boxes is described in Chapter 4.3, "Accessing Dia-
logs" , on page 97.
4.2.6 Structure of the Dialogs
The parameters are set in the menus. Menus are accessed either via the function
blocks in the diagram or by means of the MENU (CTRL+M) key. The menus are dis-
played on top of the block diagram.
If the menu buttons assign menu-specific functions to the softkeys, the "Winbar" is hid-
den.
Display