R&S SMJ100A, Operating Manual, Page: 113 / 874

Manual Operation
R&S
®
SMJ100A
97 Operating Manual 1403.7458.32 ─ 14
To access the "Graphics Settings" dialog for selecting the graphics display of the out-
put signal, select the "Graphics" function block in the diagram or press the MENU
(CTRL+M) key.
Operation of the graphics windows is analogous to menu operation.
The menu and the individual graphical displays are described in Chapter 5.3, "Graphi-
cal Display - Graphics" , on page 168.
4.3 Accessing Dialogs
The MENU (CTRL+M) key opens the complete menu tree. Selecting a functional block
and pressing the ENTER key opens the menu associated with this block.
An alternatively way to access a dialog is to use the Winbar buttons or front-panel soft-
keys or to use the HIDE (CTRl+H), CLOSE (ESC), DIAGRAM (CTRL+D) and REARR
(CTRL+A) keys on the front panel.
For a quick access to the dialogs, use one of the following alternative methods.
Displaying the block diagram or a dialog in the foreground
1. Press the DIAGRAM (CTRL+D) key to move the cursor to the block diagram.
All active menus are minimized and displayed in the form of Winbar buttons.
2. Press the associated softkey (CTRL+F1 .. F8) to display the dialog in the fore-
ground again.
Accessing the menu tree
► Press the MENU (CTRL+M) key to open the complete menu tree.
Calling the File, Setup or Hardcopy dialogs
► Use the FILE (CTRL+S), SETUP (CTRL+E) or HCOPY (CTRL+Y) keys to open the
respective dialog.
Minimizing an active menu
► Use the HIDE (CTRL+H) key to minimize an active menu.
It is displayed in the form of a Winbar button.
Automatically arranging displayed menus
► Press the REARR (CTRL+A) key to rearrange all open menus so that they overlap
as little as possible.
Accessing Dialogs