Remote-Control Commands
R&S
®
SMCVB-K164
118
User Manual 1179.0974.02 ─ 02
Parameters:
<NumAuxStr>
integer
0
Fixed response of the query.
*RST:
0
Example:
See
Example "Configuring L1 parameters"
Manual operation:
See
6.6.3
ID Commands
Example: Configuring ID parameters
:SOURce1:BB:T2DVb:ID:CELL #H0
// Sets the hexadecimal cell ID 0000.
:SOURce1:BB:T2DVb:ID:NETWork #H0
// Sets the hexadecimal network ID 0000
:SOURce1:BB:T2DVb:ID:T2SYstem #H0
// Sets the hexadecimal T2 sytsem ID 0000
:SOURce1:BB:T2DVb:ID:TXID:AVAil?
// Response: "#H0"
// No transmitter identification signals within the current geographic cell.
Commands
[:SOURce<hw>]:BB:T2DVb:ID:CELL
................................................................................118
[:SOURce<hw>]:BB:T2DVb:ID:NETWork
..........................................................................118
[:SOURce<hw>]:BB:T2DVb:ID:T2SYstem
.........................................................................119
[:SOURce<hw>]:BB:T2DVb:ID:TXID:AVAil
........................................................................ 119
[:SOURce<hw>]:BB:T2DVb:ID:CELL
<CellId>
Sets the cell identification (ID).
Parameters:
<CellId>
integer
16-bit value in hexadecimal representation.
Range:
#H0 to #HFFFF
*RST:
#H0
Example:
See
Example "Configuring ID parameters"
Manual operation:
See
[:SOURce<hw>]:BB:T2DVb:ID:NETWork
<NetworkId>
Sets the network identification.
System Commands
