R&S SMCVB-K164, User Manual

Page: 114 / 152

Remote-Control Commands
R&S
®
SMCVB-K164
114 User Manual 1179.0974.02 ─ 02
Parameters:
<TFS> OFF
OFF
Fixed response of the query.
*RST:
OFF
Example: See Example "Configuring network parameters" on page 109.
Manual operation: See "Time Frequency Slicing (TFS)" on page 46
[:SOURce<hw>]:BB:T2DVb:TXSYs <TransmissionSys>
Sets the transmission system.
Parameters:
<TransmissionSys> T2LM | T2LS | NONT2 | MISO | SISO
T2LM
T2 Lite MISO
T2LS
T2 Lite SISO
NONT2
Non-T2
MISO
MISO
SISO
SISO
*RST:
SISO
Example: See Example "Configuring network parameters" on page 109.
Manual operation: See "Transmission System" on page 44
6.6.2 L1 Commands
Example: Configuring L1 parameters
********************************************************************************
// Setting L1 parameters requires disabling T2-MI interface.
********************************************************************************
:SOURce1:BB:T2DVb:INPut:T1MI:INTerface 0
:SOURce1:BB:T2DVb:L:T2Version V111
// Sets T2 version to V1.1.1.
:SOURce1:BB:T2DVb:L:CONStel T64
// Sets L1 post modulation to 64QAM constellation.
:SOURce1:BB:T2DVb:L:REPetition 1
:SOURce1:BB:T2DVb:L:EXTension 0
:SOURce1:BB:T2DVb:L:SCRambled?
// Response: "0"
System Commands