R&S SMCVB-K164, User Manual

Page: 81 / 152

Remote-Control Commands
R&S
®
SMCVB-K164
81 User Manual 1179.0974.02 ─ 02
Manual operation: See "Save/Recall" on page 14
6.2 Input Commands
The section contains the commands for configuring the input signal. It also contains
commands for querying IP input information.
For configuring IP channel settings and local IP data network parameters, see:
●
Chapter 6.2.5, "IP Subsystem" , on page 92
●
Chapter 6.10, "BCIP Subsystem" , on page 137
Commands
● General Commands ................................................................................................81
● PLP Info Commands ...............................................................................................85
● T2-MI Packet Timing Commands ............................................................................88
● Test Signal Commands ........................................................................................... 90
● IP Subsystem ..........................................................................................................92
6.2.1 General Commands
Example: Querying general T2-MI interface parameters
:SOURce1:BB:T2DVb:INPut:T2MI:INTerface?
// Response: 0
:SOURce1:BB:T2DVb:INPut:T2MI:INTerface 1
:SOURce1:BB:T2DVb:INPut:T2MI:ANALyzer?
// Response: "Invalid S2 field 1 (check FFT size and guard interval used)"
:SOURce1:BB:T2DVb:FFT:MODE M32K
:SOURce1:BB:T2DVb:GUARd:INTerval G1128
:SOURce1:BB:T2DVb:INPut:T2MI:ANALyzer?
// Response: "No error"
:SOURce1:BB:T2DVb:INPut:T2MI:RESetlog
:SOURce1:BB:T2DVb:INPut:T2MI:PID #H1000
:SOURce1:BB:T2DVb:INPut:T2MI:SID #H0
Example: Configuring general input signal properties
:SOURce1:BB:T2DVb:SOURce EXT
********************************************************************************
// Incoming MPEG transport stream for single PLP transmission.
********************************************************************************
:SOURce1:BB:T2DVb:INPut:T2MI:INTerface 0
********************************************************************************
// Incoming T2-MI stream.
Input Commands