R&S SMCVB-K164, User Manual

Page: 113 / 152

Remote-Control Commands
R&S
®
SMCVB-K164
113 User Manual 1179.0974.02 ─ 02
Parameters:
<MisoGroup> G1 | G2
*RST:
G1
Example: See Example "Configuring network parameters" on page 109.
Manual operation: See "MISO Group" on page 45
[:SOURce<hw>]:BB:T2DVb:NETWorkmode <Networkmode>
Sets the network mode.
Parameters:
<Networkmode> MFN | SFN
*RST:
MFN
Manual operation: See "Network Mode" on page 43
[:SOURce<hw>]:BB:T2DVb:PAPR <Papr>
Sets the technique to reduce the peak to average power ratio.
Parameters:
<Papr> OFF | TR
*RST:
OFF
Example: See Example "Configuring network parameters" on page 109.
Manual operation: See "Peak To Average Power Ratio (PAPR)" on page 45
[:SOURce<hw>]:BB:T2DVb:PROFile <Profilemode>
Sets the profile mode.
Mutes P1FEF, if the modulator operates in a multi profile environment and is used to
generate a RF combined T2Base/T2Lite composite signal.
Parameters:
<Profilemode> SINGLE | MULTI
*RST:
SINGLE
Example: See Example "Configuring network parameters" on page 109.
Manual operation: See "Profile Mode" on page 44
[:SOURce<hw>]:BB:T2DVb:TFS <TFS>
Queries the TFS state.
The current firmware does not support TFS.
System Commands