Preparing for Use
R&S
®
SMCV100B
21
Getting Started 1432.7046.02 ─ 03
● HDMI: You need an adapter. Use a passive DVI to HDMI adapter.
● VGA: You need an active adapter, DVI to VGA or Display Port to VGA.
Passive adapters do not work.
If the monitor provides touch functionality, an additional connection can be
required, for example, a USB connection. Refer to the documentation of your
monitor.
4.9
Connecting USB Devices
USB connectors are located on the
. You can connect
or disconnect all USB devices from the R&S
SMCV100B during operation.
To connect USB storage devices
USB storage devices, such as memory sticks, allow easy data transfer from/to the
R&S
SMCV100B. You can also use them for firmware updates.
► Connect the USB storage device to any of the USB connectors.
To connect USB devices with external power supply
1.
NOTICE!
Connected devices with external power supply can feed back cur-
rent into the 5
V power supply of the USB interface and thus damage the
R&S
SMCV100B.
Ensure that there is no connection between the positive pole of the power
supply and the +5
V power pin of the USB interface (VBUS).
2. Connect the USB storage device to any of the USB connectors.
To connect a keyboard
► Connect the keyboard to any of the USB connectors.
When connected, the R&S
SMCV100B detects the keyboard automatically. A
detected keyboard has the default layout English – US.
To connect a mouse
► Connect the mouse to any of the USB connectors.
Connecting USB Devices
