R&S SMCV100B, Getting Started

Page: 34 / 80

Instrument Tour
R&S
®
SMCV100B
34 Getting Started 1432.7046.02 ─ 03
LAN
RJ-45 connector to connect the R&S SMCV100B to a LAN for remote control,
remote operation, and data transfer.
How to:
Chapter 4.7, "Connecting to LAN" , on page 19
USB
There are two female USB (universal serial bus) 3.0 connectors of type A (host
USB) on the rear panel. They have the same functionality as the USB connectors
on the front panel, but provide higher data rates. See
"USB" on page 32.
How to: Chapter 4.9, "Connecting USB Devices" , on page 21.
Dig. IQ HS x
Connectors for the input/output of high-speed digital I/Q signals, for example,
from and to Rohde
& Schwarz instruments.
Table 5-4 lists the interface designation (input/output) and the required option.
For more information, see data sheet.
Table 5-4: Overview of Dig. IQ HS x interfaces and required options
Interface Designation Required option
"Dig. IQ HS 1" "BB Input" R&S SMCVB-K19 digital baseband interface
"Dig. IQ HS 2" "I/Q Digital Out"
The interface is a QSFP+ (Quad Small Form-factor Pluggable) module. It sup-
ports max. bandwidth of up to 50 Gsample/s with optical active cables.
How to:
Chapter 4.12, "Connecting to Dig. IQ HS x" , on page 23
IP Data
Interface for input of IP data for real-time encoding in broadcast baseband sig-
nals.
The interface comprises a SFP+ (Small Form-factor Pluggable) socket.
How to:
Chapter 4.13, "Connecting to IP Data Interface" , on page 25
User x
BNC multipurpose connectors for defining input signals and output signals.
Table 5-5 lists the signals assigned to the "User x" connectors in the default
instrument state.
Rear Panel Tour