Instrument Control
R&S
®
SMCV100B
67
Getting Started 1432.7046.02 ─ 03
Legend
Item
Description
1
Connector icons
Represent the interfaces for signal input and output.
●
Digital I/Q HS signal connector input and output (1a, 1c)
●
RF signal connector output (1b)
Icons vary depending on the frequency.
2
Control signal
block
Indicates information on the control signals like signal content,
input or output and provides quick access to the corresponding
configuration dialog.
A dedicated control block is displayed for the baseband block
(3a) and RF block (3b).
3
Status indicator
Indicates whether the signal is running or waiting for a trigger.
4
Functional block
Represents a basic task in signal generation.
The push button provides access to any number of associated
actions to accomplish the task.
The On/Off (checkbox) and the block label quickly activates the
basic task.
5
Graphics indicator Denotes that the signal is displayed graphically (5a/5b).
6, 7
Signal lines
●
digital
●
analog
Show the currently configured signal flow:
●
Thick lines represent digital I/Q streams (6).
●
Thin lines represent analog signals (7).
8.3.3
Taskbar
The "Taskbar" contains labeled softkeys and minimized views (thumbnails) of
active graphics and dialogs.
Initially, it shows the permanently assigned softkeys. The softkey with the sine
wave denotes that no signal is activated for graphical representation.
Figure 8-2: Taskbar in default state
Whenever you open a settings or graphics dialog, it is automatically assigned to
the "Taskbar". The softkeys shown in the following figure represent the variants.
Understanding the Display Information
