Features and characteristics of modular probes
R&S
®
RT
‑
ZM
39
User Manual 1419.3128.02 ─ 05
Figure 4-5: Common mode (CM) offset compensation for a differential measurement
4.3.3
Positive input single-ended offset
The P offset function can compensate a DC voltage applied to the positive input
terminal (V
p
) at the probe tip (referenced to ground). Setting a P offset compensa-
tion in single-ended P measurement mode is directly visible on the oscilloscope
screen as a voltage offset of the measured waveform.
This function is useful when measuring single-ended AC signals with high super-
imposed DC component at the positive input terminal referenced to ground.
Offset compensation
