Preparing for use
R&S
®
QAT100
14
User Manual 1179.3073.02 ─ 02
To switch on the R&S
QAT
The R&S
QAT is off but connected to power.
1. Set the switch on the power supply to position [I].
The LED of the Power key turns orange.
2. Press the Power key.
The LED turns green. The R&S
QAT boots.
To shut down the R&S
QAT
The R&S
QAT is in the ready state.
► Press the [Power] key.
The operating system shuts down. The LED turns orange.
To disconnect from power
The R&S
QAT is in the standby state.
1.
NOTICE!
Risk of data loss. If you disconnect the product from power when it is in
the ready state, you can lose settings and data. Shut it down first.
Set the switch on the power supply to position [0].
The LED of the Power key is switched off.
2. Disconnect the product from the power source.
Switching on or off
