R&S NRX Series, User Manual

Page: 235 / 514

Remote Control Commands
R&S
®
NRX
235 User Manual 1178.5566.02 ─ 07
[SENSe<Sensor>:]POWer:REFerence <ref>
Sets the reference value for the relative power indication.
If you enter a value without unit, the unit is defined by
[SENSe<Sensor>:]UNIT:
POWer[:VALue]
. For further information, see Chapter 13.5.1.3, "Units" , on page 207.
Suffix:
<Sensor>
.
1 to 128
Configured sensor connected at: port A = 1, ... , port D = 4, R&S
NRX-B9 = 101, USB and LAN port = 5 to 100
Parameters:
<ref> Range: -290.0 to +110.0
*RST: +30.0
Default unit: dBm
Manual operation: See "Forward Reference Value, Reflection Reference Value"
on page 55
See
"Reference Value" on page 71
13.5.6 Continuous Average
Further information:
●
Chapter 7.1, "Continuous Average" , on page 70
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:CLEar
.............................................................235
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:COUNt?
..........................................................235
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:INFO?
.............................................................236
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:SIZE
...............................................................236
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:STATe
.............................................................236
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:CLEar
Effective for continuous average measurements.
Clears the contents of the result buffer.
Suffix:
<Sensor>
.
1 to 128
Configured sensor connected at: port A = 1, ... , port D = 4, R&S
NRX-B9 = 101, USB and LAN port = 5 to 100
Usage: Event
[SENSe<Sensor>:][POWer:][AVG:]BUFFer:COUNt?
Effective for continuous average measurements.
Queries the number of results that are currently stored in the result buffer.
Measurement Settings and Results
www.allice.de Allice Messtechnik GmbH