![background image](http://html1.mh-extra.com/html/rands/nrt2/nrt2_getting-started_3221269021.webp)
Preparing for Use
R&S
®
NRT2
21
Getting Started 1430.0573.02 ─ 03
3. If you want to return to a defined initial state, perform a preset.
To shut down the product
The product is in the ready state.
► Press the [standby] key.
The operating system shuts down. The LED changes to orange.
To disconnect from power
The product is in the standby state.
1.
NOTICE!
Risk of data loss. If you disconnect the product from power when it
is in the ready state, you can lose settings and data. Shut it down first.
Set the switch on the power supply to position [0].
The LED of the standby key is switched off.
2. Disconnect the product from the power source.
Further information:
●
Chapter 5.1.5, "On/Standby Key"
Switching On or Off