
Browser-Based User Interface
R&S
®
NRPxxS(N)
48
User Manual 1177.5079.02 ─ 10
Trace Time
Sets the trace length.
Remote command:
Trace Offset Time
Sets the relative position of the trigger event in relation to the beginning of the trace
measurement sequence. Used to specify the start of recording for the Trace mode.
Remote command:
[SENSe<Sensor>:]TRACe:OFFSet:TIME
Trace Points
Sets the number of required values per trace sequence. For achieving a good optimum
between the measurement speed and the resolution, you can set a value of 200 trace
points.
Remote command:
Trigger Source
See
Trigger Level
See
Trigger Delay
See
6.5
Settings
Describes the parameters for general sensor configuration.
Settings