R&S FSW-K7, User Manual

Page: 59 / 407

Configuration
R&S
®
FSW-K7
59 User Manual 1173.9240.02 ─ 23
"Table" Defines the conversion loss via the table selected from the list. Pre-
defined conversion loss tables are often provided with the external
mixer and can be imported to the R&S
FSW. Alternatively, you can
define your own conversion loss tables. Imported tables are checked
for compatibility with the current settings before being assigned.
Conversion loss tables are configured and managed in the
Conver-
sion Loss Table tab.
For details on conversion loss tables, see the External Mixer descrip-
tion in the R&S
FSW User Manual.
For details on importing tables, see "Import Table" on page 62.
Remote command:
Average for range 1:
[SENSe:]MIXer:LOSS[:LOW]
on page 198
Table for range 1:
[SENSe:]MIXer:LOSS:TABLe[:LOW]
on page 198
Average for range 2:
[SENSe:]MIXer:LOSS:HIGH
on page 197
Table for range 2:
[SENSe:]MIXer:LOSS:TABLe:HIGH
on page 197
Basic Settings
Access : INPUT/OUTPUT > "External Mixer Config" > "Basic Settings"
The basic settings concern general use of an external mixer. They are only available if
the
External Mixer State is "On".
LO Level ........................................................................................................................59
Signal ID ........................................................................................................................60
Auto ID .......................................................................................................................... 60
Auto ID Threshold ......................................................................................................... 60
Bias Settings ................................................................................................................. 60
└ Write to <CVL table name> .............................................................................61
LO Level
Defines the LO level of the external mixer's LO port. Possible values are from
13.0
dBm to 17.0 dBm in 0.1 dB steps. Default value is 15.5 dB.
Input and Frontend Settings