R&S FSMR3000, User Manual

Page: 482 / 733

Remote Commands
R&S
®
FSMR3000
482 User Manual 1179.0116.02 ─ 02
LAYout:WINDow<n>:TYPE <WindowType>
Queries or defines the window type of the window specified by the index <n>. The win-
dow type determines which results are displayed. For a list of possible window types
see
LAYout:ADD[:WINDow]?
on page 475.
Note this command is not available in all applications and measurements.
Suffix:
<n>
.
1..n
Window
Parameters:
<WindowType>
Example: LAY:WIND2:TYPE?
12.6 Analyzing Measurements (Basics)
The commands for general analysis tasks are described here.
● Zooming into the Display .......................................................................................482
● Configuring the Trace Display and Retrieving Trace Data .................................... 485
● Trace Demodulation ..............................................................................................505
● Working with Markers ............................................................................................508
● Configuring Display Lines ..................................................................................... 542
● Defining Limit Checks ........................................................................................... 544
12.6.1 Zooming into the Display
12.6.1.1 Using the Single Zoom
DISPlay[:WINDow<n>][:SUBWindow<w>]:ZOOM:AREA
.................................................... 482
DISPlay[:WINDow<n>][:SUBWindow<w>]:ZOOM[:STATe]
..................................................483
DISPlay[:WINDow<n>][:SUBWindow<w>]:ZOOM:AREA <x1>,<y1>,<x2>,<y2>
This command defines the zoom area.
To define a zoom area, you first have to turn the zoom on.
Analyzing Measurements (Basics)