Instrument Tour
R&S
®
ESW
50
Getting Started 1328.4922.02 ─ 06
Provides functionality to define various filter bandwidths.
Provides functionality to configure the measurement, for example:
●
the measurement mode (single or continuous measurements)
●
the number of measurement points
●
the measurement time
Provides functionality to configure data acquisition and analyze measured
data, for example:
●
the trace mode
●
the detector
Provides functionality to configure triggered and gated measurements.
Provides functionality to activate and position absolute and relative markers
(markers and delta markers).
Performs a peak search for active markers.
If no marker is active, marker 1 is activated and the peak search is per-
formed for it.
Spectrum application only: Provides additional analysis functions of the
measurement markers, for example:
●
the frequency counter
●
the noise measurement
●
the phase noise measurement
●
the AM/FM audio demodulator
Provides functionality to position and control markers, for example:
●
to configure the marker search
●
to configure the peak excursion
Provides the measurement functions, for example:
●
the bargraph measurement (receiver application)
●
the scan and final measurement (receiver application)
●
the AF demodulation (receiver application)
●
IF analysis
●
the channel power and ACLR measurement (spectrum application)
●
the occupied bandwidth measurement (spectrum application)
●
the Spectrum Emission Mask (SEM) measurement (spectrum applica-
tion)
●
the spurious emission measurement (spectrum application)
●
the signal statistics (spectrum application)
Provides functionality to configure the measurement.
Provides functionality to control display and limit lines.
The Front Panel