background image

Basic Operations

R&S

®

ESR

77

Getting Started 1316.3749.02 ─ 09

3. Press the "More" softkey.

4. Press the "Theme Selection" softkey. A list of available themes is displayed.

5. Select the desired theme from the list.

The screen display changes according to the selected theme.

SCPI command:

DISPlay:THEMe:SELect

6.4.10

 

Displaying and Setting the Date and Time

You can switch the date and time display in the diagram footer on or off. By
default, it is displayed. You can also switch between German and US format.

Switching the date and time display off

1. Press the SETUP key.

2. Press the "Display Setup" softkey.

3. Press the "Time+Date" softkey to "Off".

Changing the format

1. Press the SETUP key.

2. Press the "Display Setup" softkey.

3. Press the "Time+Date Format" softkey until the required format is selected.

Setting the date and time

To set the date and time, click on the date and time display in the diagram footer.
The standard Windows "Date and Time Properties" dialog is displayed and you
can set the correct date and time.

6.4.11

 

Changing the Display Update Rate

When performance is poor due to slow data transfer (for example during remote
control), it may be helpful to decrease the frequency with which the screen dis-
play is updated.

Changing the Display

Summary of Contents for ESR

















































































































Reviews: