Operating basics
R&S
®
EDS300
41
Getting Started 1179.5630.02 ─ 01
Key name
(upper inscription)
Series of (special) characters and number provided
.
. * : _ , ; " ' ? ( ) #
–
<toggles between capital and small letters>
6.4
Error and status messages
If errors or irregularities are detected, a keyword or error message is displayed at
the top of the window. If an error occurs that affects the measurement, [UNCAL]
is displayed in red letters at the top of the screen. In this case, check the error log
for missed errors. The [UNCAL] display is only removed when the R&S
EDS300
is switched off.
All error and status messages displayed on the R&S
EDS300 are also
stored to an error log on the instrument for later inspection.
The status bar contains status messages for the used power supply or data oper-
ations.
Table 6-3: Status messages
Message
Description
Battery
The internal battery pack is currently supplying power to the
R&S
EDS300.
Mains
The AC power adapter is currently supplying power to the R&S
EDS300.
Mount USB-Stick
No USB storage device has been connected to the R&S
EDS300 yet, for
example for data logging.
Can't mount
USB-Stick
The USB storage device connected to the R&S
EDS300 could not be
read correctly.
Mount USB-Stick:
OK
The USB storage device connected to the R&S
EDS300 is ready to store
data.
USB LOGGING ON
Data logging to a USB storage device is active.
LOGGING STOPPED
Data logging to a USB storage device was stopped.
Error and status messages
