Preparing for use
R&S
®
EDS300
16
Getting Started 1179.5630.02 ─ 01
2.
NOTICE!
Insufficient airflow can cause overheating and damage the product.
Design and implement an efficient ventilation concept for the rack.
To mount the R&S
EDS300 in a rack
1. Use an adapter kit to prepare the R&S
EDS300 for rack mounting.
a) Order the rack adapter kit designed for the R&S
EDS300. For the order
number, see the data sheet.
b) Mount the adapter kit. Follow the assembly instructions provided with the
adapter kit.
2. Lift the R&S
EDS300 to shelf height.
3. Grab the handle and push the R&S
EDS300 onto the shelf until the rack
brackets fit closely to the rack.
4. Tighten all screws in the rack brackets with a tightening torque of 1.2
Nm to
secure the R&S
EDS300 in the rack.
To unmount the R&S
EDS300 from a rack
1. Loosen the screws at the rack brackets.
2. Remove the R&S
EDS300 from the rack.
3. If placing the R&S
EDS300 on a bench top again, unmount the adapter kit
from the R&S
EDS300. Follow the instructions provided with the adapter kit.
4.5
Preparing for outdoor usage
If you want to perform a walk test, the R&S
EDS300 requires weather protection
because the product casing is not waterproof. Only use the internal battery as a
power supply for outdoor operation.
See also
Preparing for outdoor usage
