Operation
R&S
®
EB500
28
Getting Started 4072.8432.02 ─ 04
a) The MARK key enables the marker function. The "Marker" softkey bar allows
two sets of X markers and one set of Y markers to be set.
b) When the marker set is selected, turning the SELECT rollkey will move the
selected marker highlighted in green as illustrated above. The selected
marker can be toggled by pressing the "X1 / X2", "X3 / X4" or "Y1 / Y2"
softkey.
c) Pressing the SELECT rollkey (5g) toggles the selected set of markers on and
off.
d) The ATT key selects the RF attenuation function. Pressing the SELECT roll-
key (5g) toggles between automatic and manual attenuation. When in man-
ual attenuation mode, turning the SELECT rollkey (5h) will allow the manual
attenuation level to be set.
Graphical User Interface (GUI)
